GTE-D 52mm 300-8000kg Co-rotating Twin Screw Extruder For Plastic

GTE-D 52mm 300-8000kg Co-rotating Twin Screw Extruder For Plastic

Granuwel manufactures high-torque GTE-D 52mm 300-8000kg co-rotating twin screw extruder to cover a very wide range of plastic compounding products.

Description

As a top twin screw extruder manufacturer in China, Granuwel has many years of experience in manufacturing and supplying equipment such as co-rotating twin screw extruders, lab scale extruders, single screw extruders, and two stage extruders. GTE-D 52mm 300-8000kg Co-rotating Twin Screw Extruder are widely used in the plastic industry, chemical industry, compounding industry, powder coating, food industry, wood plastic, etc.

 

Technical characteristic

Gearbox:

The main Gearbox is exported from Italy ZAMBELLO gearbox or Germany HENSCHEL gearbox.

Oil system with filter, pressure, temperature and filter alarm stop function (oil pressure partial gear no lubrication, that is, the host machine needs to stop or delay stop) oil temperature reaches 65℃ alarm, 70℃ stop, lubricating oil cooler for the chip heat exchanger.

 

Safety clutch:

Main motor output shaft and transmission distribution box input shaft clutch for imported products, the product has the function of overload protection security, when more than set load torque, two and a half clutch automatic separation, release, the overload protection dowel pin set torque overload separation is 95% of the maximum torque.

Two and a half clutch corresponding positions are installed M18 speed sensor (using enhanced base), when the clutch both sides have a speed difference, automatic alarm and stop the main motor running, overload protection dowel pin need manual reset after release, clutch with the elastic element, ensure uniform torque can pass, after dynamic balance test and adjustment of the coupling, the speed measuring element is installed on one side of the clutch, and the signal is connected to the control system. When the clutch slips, the main motor stops immediately to protect the inlet clutch.

 

Core shaft:

Choose imported products.

-Excellent tensile strength combined with good toughness

-High thermal stability, high resistance to thermal shocks

-Good high-temperature strength

-Good machinability and polishability

-Excellent through-hardening properties

-Good dimensional stability during hardening

 

GTE-D series gearbox

GTE-D-series-gearbox 1 GTE-D-series-gearbox 2

 

GTE-D Series Twin Screw Extruder

Model Diameter(mm) Max. L/D Speed(rpm) Power(kw) Output(kg/h)
GTE 52D 51.4 68 600 110 300~500
GTE 65D 62.4 68 600 250 700~1000
GTE 75D 71.4 68 600 315 800~1200
GTE 85D 81 68 600 355 1000~1600
GTE 95D 93 68 600 550 1500~2200
GTE 120D 116 68 600 900 3000~4500
GTE 135D 133 68 600 1800 5500~8000

 

 

Related Products

Ask For A Quick Quote

If you would like to have a question then get in touch today, we are ready to assist 24/7.
We welcome your cooperation and we will develop with you.

Ask For A Quick Quote

If you would like to have a question then get in touch today, we are ready to assist 24/7.
We welcome your cooperation and we will develop with you.

We use cookies to enable all functionalities for best performance during your visit and to improve our services by giving us some insight into how the website is being used. Continued use of our website without having changed your browser settings confirms your acceptance of these cookies. For details please see our privacy policy.